Arista

Arista

While this isn’t a project in a specific sense, it will be where all the Arista posts will be located. This will include; adding the device to GNS3, configuring with ZTP, standard switch configurations and VXLAN.

I have two topologies in my lab environment, a spine and leaf topology and a standard collapsed core topology. These topologies are part of a larger one that I used for ISE.

BGP Route Reflector
Basic BGP Information
BGP, Border Gateway Protocol, is the routing protocol that connects the internet, and it is...
Arista
Arista VXLAN 3 - Automating Adding New Spine and Leaf Switches
I have been over the automatic creation of the VXLAN topology in the previous post. However,...
Arista
Arista VXLAN 2 - Automating Spine and Leaf Configuration
This is going to follow on from the previous post to get a basic three switch topology up and...
Arista
Arista VXLAN 1 - VXLAN, HER and EVPN Basic Configuration
This lab use part of the Arista Spine and Leaf topology I have created in GNS3. Specifically,...
Arista
Arista AEM
AEM is the event handler for Arista. It can be used to automate tasks giving the user the ability...
Arista
Using ISE AAA TACACS For Arista XMPP
In the previous XMPP post, I was using local users in the XMPP ejabberd server. There was command...
Arista
Arista XMPP Sending Commands
Now that the XMPP server and switches have been configured, commands can now be issued from...
Arista
Arista XMPP Configuration
Extensible Messaging and Presence Protocol is an open standard protocol for instant messaging....
CP logo
Checkpoint Enable DHCP Server and DHCP Options 66, 67
As part of a lab for Arista, I have created a DHCP server on the Checkpoint firewall. This...
Arista
Arista Zero Touch Provisioning (ZTP)
Zero Touch Provisioning is a way for Arista switches to get a configuration file via DHCP options...